Factory Tool V1.64 -

Features a multi-port structural layout capable of flashing up to 8 Rockchip devices simultaneously through a synchronized USB hub infrastructure.

Press and hold the physical button on your hardware (often found inside the AV jack or a pinhole marked 'Reset').

This is the most critical step. Your device must be in or Loader mode to be detected: Power off the device. factory tool v1.64

: A high-quality USB cable (usually USB-A to USB-A or USB-C depending on the port). Step-by-Step Guide 1. Setup the Tool Download and extract the FactoryTool v1.64 zip folder.

Flashing firmware is an "at-your-own-risk" procedure. While it is usually safe when following manufacturer instructions, failing to use the correct firmware image for a specific hardware revision can lead to permanent hardware failure. It is essential to verify that the firmware matches the specific Rockchip processor (e.g., RK3399, RK3328) inside the device before proceeding. step-by-step guide Features a multi-port structural layout capable of flashing

If you need help resolving a specific error code or locating compatible files, tell me:

Download and extract the Factory Tool v1.64 archive to an easily accessible folder (e.g., C:\FactoryTool_v1.64 ). Your device must be in or Loader mode

The tool will detect the device on a specific port (e.g., "Port 1") and display a progress bar. : The port box will turn green and display "OK". Troubleshooting Common Errors Error Description Potential Root Cause Lower Version Tool version is too old for the chipset.